- November 8, 2021
- By Park Muffler
- In Blog
Your rear differential is a mechanism in your vehicle that enables the crankshaft to create torque before it is distributed through the transmission to the driveshaft and wheels.
Overall, the rear differential transmits engine power to the wheels and allows them to have different rotation speeds – especially during a turn.
Your driving wheels do not rotate at the same speed during a turn because the inside wheel rotates slower than the opposite outside wheel.
The rear differential decides the speed and frequency of the turning of the axle and wheels in relation to the driving shaft to ensure stability.
When one wheel is spinning slower on a curb, for example, the rear differential will keep driving the other wheel and prevent skidding, binding, or jerking. Without a differential, the wheels would lock together at the same speed during a turn and increase the likelihood of losing control.
Other than turning, not having a rear differential could cause issues with the drivetrain being exposed to high forces, causing one tired to grab and slip in order to maintain the same speed as the other tire. This puts a huge strain on axle components and can lead to premature tire wear.
Types of Rear Differentials
There are four main types of differentials used in vehicles today.
Open differentials are the most basic and allow for variations of individual wheel speed. They transfer torque even if the wheel has zero traction, resulting in a spinning tire.
Under ideal road conditions, a limited-slip differential acts like an open differential but prevents tire slipping when cornering hard or accelerating. These are most commonly found on race cars.
Locking differentials are mainly found on off-road vehicles and some performance cars. They use clutches and springs to activate a lock to send equal amounts of power to each wheel no matter the traction situation – this allows them to gain a great amount of traction.
Lastly, a torque-vectoring differential is the most complicated and advanced type of rear differential. This differential uses sensors and electronics to gather data such as road surface, throttle position, etc. to active electronically controlled clutches.
Symptoms of a Bad Rear Differential
It’s fairly easy to recognize when your rear differential begins to wear out. You’ll probably experience the following:
- Difficulty in Handling: When your rear differential starts to wear out, you’ll notice a loss of precision when it comes to making turns.
- Tire Damage: Having your tires rotate at the same speed while taking corners will lead to premature wear on the inner tires or, worse, damage.
- Vibrations and Shaking: If the universal joints of the rear differential are significantly worn and torn, you’ll notice a vibration in the driveshaft – especially when you accelerate.
- Noises: The most common sign of a failing rear differential will be a whining noise due to a lack of lubrication of its internal components.
- Gear Grinding: Humming noises and gear grinding can also indicate an issue with your rear differential.
- Rattling While Idling: If you turn your vehicle on and put it into drive, you may rear a rattling noise coming from the rear of the vehicle. This could be a sign of a bad differential or driveshaft joint.
- Fluid Leaks: The rear differential and universal joints have seals and use lubricants to work properly. A leak or cracked seal may cause vibrations and failure of rear differential gears.
When rear differentials fail, it can cause vibration, noises, and fluid leaks. Ultimately, it can impact your vehicle’s handling and acceleration.
If you notice any of the above symptoms, it’s crucial that you consult a certified mechanic to diagnose and correct the issue.
What Causes Rear Differentials to Go Bad?
Abused or neglected rear differentials can go bad quickly, even in the first kilometers of a brand new vehicle.
Here are some specific reasons why a rear differential can go bad:
- Over-driving the car when it’s new. Brand new vehicles should only make short trips during the first 4,800 to 8,000 km under speeds of 80 km/h. The pedal should also be kept under half-throttle and the vehicle should not haul or tow anything during this time.
- Ignoring the gear lube between 4,800-8,000 km. This distance indicates the end of the break-in period and your vehicle’s oil should be changed during this time.
- Spinning your wheels: Excessive wheel speed can heat up the differential and the spike in load can damage the internal parts of the differential as well as components of the drivetrain.
Differential failure is rare, especially if it is being maintained properly. However, issues with rear differentials usually do not happen suddenly and develop over time.
What Happens if Your Rear Differential Goes Out?
What happens after a rear differential goes out depends entirely upon the severity of the issue.
For example, broken gear teeth or chipped teeth can cause a skip in power or vibration that increases with speed. Depending on which teeth are damaged, you may experience constant vibrations or vibrations when turning.
Multiple broken teeth will cause a rattling sound that increases in severity. In this case, you should stop driving your vehicle and have it looked at right away.
Otherwise, you could lose control of your vehicle while driving – you may have difficulty making turns but your wheels can also lock up as well.
Repair Your Rear Differential Right Away!
Not only is driving with a damaged rear differential dangerous but, if you don’t have the issue addressed right away, it could snowball into more expensive repairs down the road.
Even though rear differentials can experience a wide range of issues, these problems are fairly easy to spot and repair when caught early on.
To prevent things from getting worse, have your vehicle brought in right away for repair! Our expert team at Park Muffler can diagnose rear differential damage as well as prompt and courteous service to ensure you and your vehicle are back on the road again!
Get in touch with us today!